Table of Contents
Advertisement
5
L
O
OCAL
PERATION
The RX-1 Compact Operational Receiver can be operated in local mode using its front panel or through
Ethernet using the Remote Control GUI. Multiple receivers can be monitored and controlled through the
interface.
Monitoring is available for all clients (up to its max number of connections), but only one at a time can control
the receiver. The front panel can be configured to be the unique controller of the receiver.
5.1
Front Panel Control
The RX-1 front panel interface is composed of three (3) 2.2-inch 240x320 resolution TFT screens with
262k colors and a keyboard for monitoring, control, graphical display, as well as a SD interface for
secure upgrades.
Front air vents allow optimal air flow for heat dissipation, from front to back.
Configuration is set-up with the keyboard, using the right most LCD. The two left LCDs are dedicated
to graphical display.
© Safran Data Systems – IMP000074 e14r1
RX-1 Compact Operational Receiver
User's Manual
Figure 7: RX-1 Front Panel
This document is the property of
It cannot be duplicated or distributed without expressed written consent.
Ref.
D104047
Is.Rev
08
Previous Ref.:
-
Date:
21/06/2021
Safran Data Systems
.
Page 42
Advertisement
Table of Contents
