Safran RX-1 User Manual page 64

Both parameters allow to set-up the AGC output voltage for a given minimum input signal strength.
To change the sign, use the down arrow
When AGC Zeroing is Enabled, it will measure and average the current level at each channel input, considering
this is the input noise. Level can now be set as Signal Strength (over the noise) instead of Absolute.
© Safran Data Systems – IMP000074 e14r1
RX-1 Compact Operational Receiver
User's Manual
Figure 27: RX-1 Tracking Configuration Menu (AGC)
It cannot be duplicated or distributed without expressed written consent.
Ref. D104047
Is.Rev
Previous Ref.:
Date:
.
Safran Data Systems
This document is the property of
08
-
21/06/2021
.
Page 64