Table of Contents
Advertisement
4.3.2
Local Mode.
When the configuration mode is activated, the Cortex RTR can be set to a « local » mode by keeping
the connection to the Control port open.
In this way, no other remote clients can reconfigure it until the connection is released by the Local
Operator, or by receiving a Control port reset command at the Reset port.
To open a connection to the « Control » port, click on Execute / Open Control Port.
To close the connection to the « Control » port, click on Execute / Close Control Port.
This function can also be achieved by clicking on the
4.3.3
Managing TCP/IP Clients.
The icon
from the toolbar creates the following window to manage TCP/IP clients :
This window allows you to reset TCP/IP ports. This function is password protected.
Note : By default, no password is defined.
© Safran Data Systems – IMP000074 e14r1
Radio Telemetry Receiver
Graphical User Interface Manual
This document is the property of
It cannot be duplicated or distributed without expressed written consent.
Ref.
D130486
Is.Rev
03
Customer Ref.:
Date:
21/06/2021
icon in the Tool bar.
Safran Data Systems
-
.
Page 17
Advertisement
Table of Contents
