Changing Devices - Omron NJ Series User Manual

If an inconsistency is found, open the originator's Edit Device Parameter Dialog Box and click
the Connection Tab. The inconsistent connection in the Register Device List is displayed
with a
To change the connection setting and select a different target variable, select the connection as
shown below and click the Edit Button.
7-2-17

Changing Devices

You can change devices that are registered in a network configuration with the Network Configurator.
Select Change Device from the Device Menu to display a list of the possible devices to change.
You can change a device only when there is complete or upward compatibility with the device.
Device Changes
Model after
change
Model
CIP
before
Rev
change
CS1W- Rev2
EIP21
NJ/NX-series CPU Unit Built-in EtherNet/IP Port User's Manual (W506)
icon (instead of the normal
icon (normally )
CS1W CJ1W CJ1W CJ2B-
-EIP21 -EIP21 -EIP21 EIP21
(CJ2)
Rev2 Rev3 Rev3 Rev3
--- Yes Yes Yes
7 Tag Data Link Functions
icon).
CJ1W CJ2M NJ501-££££
-EIP21 NJ301-££££
(NJ) NJ101
Rev1 Rev2
Rev3 Rev3
*1 *2
r5 r3 r4/5 r4/5
NX701 NX102 NX1P2
Rev2 Rev 2 Rev2
No No No
7-77
7