Omron NJ Series User Manual page 261

Machine automation controller, cpu unit built-in ethernet/ip port
Hide thumbs Also See for NJ Series:
Table of Contents

Advertisement

NX-series CPU Unit
Item
NX701
Connec-
Number of
256
tion
connec-
(total of
tions
512 with
the two
ports)
Maximum
722 words
data size
*3
per con-
(Data con-
nection
currency is
main-
tained at
each con-
nection.)
Packet intervals (RPIs)
0.5 to
10,000 ms
in 0.5-ms
incre-
ments
Communications band-
40,000
*4
*5
width used (pps)
pps
*1.
The maximum number of tags is given based on the following conditions.
All the tag sets contain eight tags each.
The maximum 32 tag sets are all used.
*2.
If the total number of registered tag sets exceeds 40, a Number of Tag Sets for Tag Data Links Exceeded (840E0000 hex) event oc-
curs.
*3.
To use data of 505 bytes or more, large forward open (an optional CIP specification) should be supported. The SYSMAC CS/CJ-series
Units support large forward open, and if you use nodes from other companies, confirm that the devices also support it.
*4.
The pps means "packets per second", and indicates the number of packets that can be processed per second.
*5.
If the two built-in EtherNet/IP ports are used simultaneously, the given value is applied as the upper limit of the total bandwitdh of the
two ports.
 Specifying Tags
When you assign a tag to a device, you can specify the device with its network variable or I/O
memory address. Some CPU Units, however, may not support both of these methods.
Communications with such CPU Units are possible though, regardless of whether the I/O memory
address or network variable is specified for the tag assignment.
The supported tag specification methods for each CPU Unit are listed in the table below.
CPU Unit
NX-series CPU Unit
NJ-series CPU Unit
NJ/NX-series CPU Unit Built-in EtherNet/IP Port User's Manual (W506)
NJ-series CPU Unit
Unit ver-
NX102
NX1P2
sion 1.00
to 1.02
32 (total of
32
64 with the
two ports)
300 words
(Refer to 7-1-7 Concurrency of Tag Data Link Data
on page 7-12 for the conditions for maintaining da-
ta concurrency on a connection basis.)
1 to
2 to
10 to
10,000 ms
10,000 ms
10,000 ms
in 1-ms in-
in 1-ms in-
in 1-ms in-
crements
crements
crements
12,000
3,000 pps
1,000 pps
*5
pps
EtherNet/IP Unit
---
---
CJ1W-EIP21
7 Tag Data Link Functions
CJ2M-CPU3£
Unit version
Unit ver-
sion 1.03
2.0
or later
32
20 words
(Data concurrency is
maintained at each con-
nection.)
1 to
1 to 10,000ms in 0.5-ms
10,000 ms
increments
in 1-ms in-
crements
3,000 pps
3,000 pps
Yes: Supported, No: Not supported
Network Configura-
Specifying
tor
with network
hardware list name
variable
NX701
Yes
NX102
Yes
NX1P2££££
Yes
NJ501-££££
Yes
NJ301-££££
NJ101
CJ1W-EIP21 (NJ)
Yes
CS1W-EIP21
CJ1W-EIP21
CJ2H-CPU6£-
2.1 or lat-
EIP
er
256
640 words
252 or 722
*3
words
(Data concurren-
cy is maintained
at each connec-
tion.)
0.5 to 10,000 ms
in 0.5-ms incre-
ments
6,000 pps
Specifying
with I/O memo-
ry address
No
*1*2
Yes
*1*2
Yes
*1
Yes
*1
Yes
7-87
7

Advertisement

Table of Contents
loading

Table of Contents