Omron NJ Series User Manual page 167

 Recognition 1
Setting
Recognition method
IP address
Host name
Community name
 Recognition 2
Setting
Recognition 2
Recognition method
IP address
Host name
Community name
NJ/NX-series CPU Unit Built-in EtherNet/IP Port User's Manual (W506)
5 Sysmac Studio Settings for the Built-in EtherNet/IP Port
Description
Set the method to use to specify SNMP managers for which ac-
cess is permitted.
•
IP address
•
Host name
Make these settings to permit access by only certain SNMP
managers.
Access is not allowed unless an IP address or host name is set.
Set the IP address of the SNMP manager.
If the default setting of 0.0.0.0 is used, access by all SNMP man-
agers is permitted.
(Set this setting if Recognition method in Recognition 1 is set to
the IP address Option.)
Set the host name of the SNMP manager.
(Set this setting if Recognition method in Recognition 1 is set to
the Host name Option.)
(You can use up to 200 single-byte alphanumeric characters,
dots, and hyphens with up to 63 single-byte alphanumeric char-
acters between dots.)
Set the community name to enable the SNMP manager to ac-
cess information from the built-in EtherNet/IP port.
(Single-byte alphanumeric characters, dots, and hyphens: 255
characters max.)
Description
Specify whether to use the recognition 2 settings.
•
Use
•
Do not use
Set the method to use to specify SNMP managers for which ac-
cess is permitted.
•
IP address
•
Host name
Make these settings to permit access by only certain SNMP man-
agers.
Access is not allowed unless an IP address or host name is set.
Set the IP address of the SNMP manager.
If the default setting of 0.0.0.0 is used, access by all SNMP man-
agers is permitted.
(Set this setting if Recognition method in Recognition 2 is set to
the IP address Option.)
Set the host name of the SNMP manager.
(Set this setting if Recognition method in Recognition 2 is set to
the Host name Option.)
(You can use up to 200 single-byte alphanumeric characters,
dots, and hyphens for a host name, including up to 63 single-byte
alphanumeric characters between two dots.)
Set the community name to enable the SNMP manager to ac-
cess information from the built-in EtherNet/IP port.
(Single-byte alphanumeric characters, dots, and hyphens: 255
characters max.)
Default
IP address
None
None
public
5
Default
Do not use
IP address
None
None
public
5-13