Peripheral Devices; Programming Consoles - Omron C200HE-CPU42-E Instruction Manual

Peripheral Devices

2-3

Peripheral Devices

2-3-1 Programming Consoles

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
3. I/O Indicators (LED)
The indicators show the ON/OFF status of the I/O points.
4. Unit Number Setting Switch
Turn OFF the power supply to the PC and set the unit number to between 0
and F using a flat-blade screwdriver, being careful not to damage the slot or
leave the switch set half-way between two settings.
5. 24-pin Connectors
There are two 24-pin connectors.
There are various Peripheral Devices that can be use to support C200HX/
C200HG/C200HE operation. These Peripheral Devices are introduced in this
section.
There are two Programming Consoles that can be used with the C200HX/
C200HG/C200HE: the C200H-PRO27-E and the CQM1-PRO01-E. The follow-
ing illustration shows the C200H-PRO27-E Programming Console.
As shown in the illustration, the C200H-PRO27-E Programming Console con-
nects to the C200HX/C200HG/C200HE CPU Unit with C200H-CN222 or
C200H-CN422 Connecting Cable, which must be purchased separately.
The CQM1-PRO01-E Programming Console comes with 2 m of Connecting
Cable.
Connected to Peripheral Port on CPU Unit.
C200H-CN222 (2 m) or
C200H-CN422 (4 m), Connecting
Cable
C200H-PRO27-E Programming Console
Section 2-3
31