Omron NJ Series User Manual page 531

The Synchronization Window is displayed, and comparison of the user program and parameter
settings between the Sysmac Studio and the Controller is started.
2
The following Uploading and Downloading Data Window is displayed after the automatic com-
parison.
3
Clear the Do not transfer the EtherNet/IP connection settings (i.e., tag data link settings)
Check Box and then click the Transfer To Controller Button.
Then the EtherNet/IP connection settings are transferred along with the not-synchronized data.
If no EtherNet/IP connection settings are set in the Sysmac Studio, no data will be sent.
 Transferring all data
1
Establish an online connection between the computer and the Controller and then select
Transfer - To Controller from the Controller Menu. (Or, click the
2
The Transfer to Controller Dialog Box is displayed.
NJ/NX-series CPU Unit Built-in EtherNet/IP Port User's Manual (W506)
Appendices
Button on the Toolbar.)
A-27
A