Omron NJ Series User Manual page 406

11 FTP Server
 Function
• Connects the FTP server. Normally, the FTP server IP address is specified to execute this com-
mand automatically when the FTP client is booted.
user
 Format
user [user_name]
 Function
• Specifies the user name. Specify the FTP login name set in the built-in EtherNet/IP port system
setup.
• The user name is automatically requested immediately after connection to the FTP server is
opened.
ls
 Format
ls [-l] [remote_file_name [local_file_name]]
 Function
• Displays the names of files on the remote host (on the SD Memory Card).
• Set the switch [-l] to display not only the file names but the creation dates and sizes as well. If the
switch is not set, only the file names are displayed.
• Specify a file on the SD Memory Card for the remote_file_name.
• If the local_file_name is specified, the file information is stored in the specified file.
mls
 Format
mls remote_file_name local_file_name
 Function
• Displays a list of the names of files on multiple remote hosts (on the SD Memory Card).
• For the remote_file_name, specify a directory on the SD Memory Card in which you wish to list
files contained, or a file name. Input an asterisk (*) to display a list of the current working directo-
ry.
• If the local_file_name is specified, the file information is stored in the specified file. Input a hy-
phen (-) to display a list of the remote hosts but not store the list of file names.
11-12
NJ/NX-series CPU Unit Built-in EtherNet/IP Port User's Manual (W506)