Omron NJ Series User Manual page 43

Item
Allowed communi-
cations bandwidth
per Unit
Number of regis-
trable tags
CIP service:
Tag data links
(cyclic commu-
nications)
Tag types
Number of tags
per connection (=
1 tag set)
Maximum link data
size per node
Maximum data
size per connec-
tion
Number of regis-
trable tag sets
Maximum size of 1
tag set
Changing tag data
link parameters
when Controller is
in RUN mode
Multi-cast packet
*8
filter
NJ/NX-series CPU Unit Built-in EtherNet/IP Port User's Manual (W506)
NX701-£££ NX102-£££
£ £
Unit version Unit version
1.10 or later 1.30 or later
40,000 12,000
*2*3 *2*3
pps pps
Note: The Note: The
heartbeat is heartbeat
included. and the CIP
Safety rout-
ing are in-
*4
cluded.
256 per port (total of 512 with
two ports)
Network vari- Network vari-
ables ables
CIO, Work, CIO, Work,
Holding, DM, Holding, DM,
or EM Areas or EM Areas
cannot be can be used.
used.
8 (7 tags when the tag set includes the Controller status)
739,328 38,400 bytes
bytes
*5 *5
1,444 bytes 600 bytes
Data concurrency is maintained within each connection.
Refer to 7-1-7 Concurrency of Tag Data Link Data on page 7-12 for methods to maintain con-
currency.
256 per port 32 per port (1
(1 connection connection =
= 1 tag set) 1 tag set)
(total of 512 (total of 40
with two with two
ports)
*6
ports)
722 words 300 words
(The Control- (The Controller status uses 1 word when the tag set includes the Controller
ler status status.)
uses 1 word
when the tag
set includes
the Controller
status.)
*7
Supported
Supported
Specifications
NX1P2-££ NJ501-££££
NJ301-££££
££££
Unit version Unit version
1.13 or later 1.00 to 1.02
*2 *2
3,000 pps 1,000 pps
Note: The heartbeat is included.
256
Network vari- Network variables
ables CIO, Work, Holding, DM, or EM Areas can be
CIO, Work, used.
Holding, or
DM Areas
can be used.
19,200 bytes
32 (1 connection = 1 tag set)
1 Introduction
NJ101-£££
£
Unit version Unit version
1.03 or later 1.10 or later
*2
3,000 pps
1-9
1