Omron NJ Series User Manual page 523

Machine automation controller, cpu unit built-in ethernet/ip port

Hide thumbs Also See for NJ Series:

Table of Contents

1) Click the + Button under the Target Device List in the Toolbox.

The Add Target Device Pane is displayed.

2) Enter relevant items for the target devices to add.

Node address

3) Here, set the following items for Controller 3 and click the Add Button.

The target device is added to the Target Device List in the Toolbox.

Node address: 192.168.250.3

Model name: NJ501-1500

4) You can click the Import Tag Set Button to import the tag sets that are set in the Network

Configurator to the target devices.

Select To/From File - Export to File in the Tag Sets Tab Page of the Edit Device

Parameters Dialog Box, and generate CSV files to import.

 Adding EDS Files

Note The Modular EDS device is supported by the Sysmac Studio version 1.11 or higher.

Right-click anywhere in the Target Device List in the Toolbox of the EtherNet/IP Connection

Setting Tab Page and select Display EDS Library from the menu.

NJ/NX-series CPU Unit Built-in EtherNet/IP Port User's Manual (W506)

Enter the target device IP address.

Select the target device model.

Select the revision of the target device.

Troubleshooting