7 Tag Data Link Functions
Information. By default, the target ID is automatically set to the rightmost 8 bits of the IP ad-
dress. In the example above, the target device's IP address is 192.168.250.2, so the target
node ID is #002. If a target node ID is duplicated and you want to change the target node ID,
click the Change Target Node ID Button and change the target ID.
Editing Settings for Individual Connections
You can edit each connection separately.
Refer to Editing Settings for All Connections on page 7-40 for information on how to edit all the
connections in a table format.
1
Click the Connections Tab and then the click the New Button.
The following Edit Connection Dialog Box is displayed according to the type of device that is
selected.
• (A) Using Built-in EtherNet/IP Ports as Targets (for Input Only)
• (B) Using Other EtherNet/IP Devices as Targets (for Settings Other Than Input Only)
7-38
NJ/NX-series CPU Unit Built-in EtherNet/IP Port User's Manual (W506)