Starting And Stopping Tag Data Links - Omron NJ Series User Manual

7 Tag Data Link Functions
• Differences Found in the Device Type
Click the OK Button or the Close Button.
5
If multiple nodes have been selected and compared, the following message is displayed. Click
theYes Button.
The comparison results are displayed in order of the selected nodes.
7-2-12

Starting and Stopping Tag Data Links

Automatically Starting Tag Data Links
Tag data links are automatically started immediately after the data link parameters are downloaded
from the Network Configurator.
(They are automatically started after the CPU Unit's power is turned ON or the Unit is restarted.)
7-68
NJ/NX-series CPU Unit Built-in EtherNet/IP Port User's Manual (W506)