Omron NJ Series User Manual page 169

Setting
Community name
Version
 Trap 2
If the Use Option is selected for SNMP trap, you need to make the following settings.
Setting
Trap 2
Specifying method
IP address
Host name
Community name
Version
NJ/NX-series CPU Unit Built-in EtherNet/IP Port User's Manual (W506)
5 Sysmac Studio Settings for the Built-in EtherNet/IP Port
Description
Set the community name.
(You can use up to 255 single-byte alphanumeric characters.)
Set the version of the SNMP manager.
•
SNMPv1
•
SNMPv2C
Description
Specify whether to use the Tap 2 settings.
•
Use
•
Do not use
Set the specifying method for the SNMP manager destination for
SNMP traps.
•
IP address
•
Host name
Set the IP address of the SNMP manager.
(Set this setting if the Specifying method in the Trap 2 settings
is set to the IP address Option.)
Set the host name of the SNMP manager.
(Set this setting if the Specifying method in the Trap 2 settings
is set to the Host name Option.)
(Single-byte alphanumeric characters, dots, and hyphens: 200
characters max. with up to 63 single-byte alphanumeric charac-
ters between dots.)
Set the community name.
(You can use up to 255 single-byte alphanumeric characters.)
Set the version of the SNMP manager.
•
SNMPv1
•
SNMPv2C
Default
public
SNMPv1
Default
Do not use
IP address
None
5
None
public
SNMPv1
5-15