Omron NJ Series User Manual page 336

8 CIP Message Communications
Attribute ID Parameter name
02 hex Configuration Capabil-
ity
03 hex Configuration Control
04 hex Physical Link Object
Path size
Path
05 hex Interface Configura-
tion
IP Address
Network Mask
Gateway Address
Name Server
Name Server2
Domain Name
06 hex Host Name
*1. The value is always FALSE for a CPU Unit with unit version 1.01 or earlier.
*2. The value is the size of domain name (2 bytes) + domain name (48 bytes max.).
*3. The value is the size of host name (2 bytes) + host name (64 bytes max.).
8-74
Description
Indicates a Controller Con-
figurations and Setup that
can be set to the interface.
Sets the method used to set
the IP address when the in-
terface starts.
The path to the link object in
the physical layer.
The path size (WORD size).
The path to the link object in
the physical layer (static).
The interface settings.
IP address.
Subnet mask.
The default gateway.
The primary name server.
The secondary name server.
The domain name.
The host name (reserved).
NJ/NX-series CPU Unit Built-in EtherNet/IP Port User's Manual (W506)
Read/write data
Attrib-
Data
ute
type
Read DWOR Bit 0: BOOTP Client: Always
D TRUE.
Bit 1: DNS Client: Always
TRUE.
Bit 2: DHCP Client: Always
FALSE.
Bit 3: DHCP-DNS Update: Al-
ways FALSE.
Bit 4: Configuration Settable:
Always TRUE.
Bit 5: Hardware Configurable:
Always FALSE.
Bit 6: Interface Configuration
Change Requires Reset: Al-
ways FALSE.
bit7: ACD Capable
TRUE.
Bits 8 to 31: Reserved (always
FALSE).
Read/ DWOR Bit 0 to 3: IP Address Setting
Write D Method
0 = Setting the static IP ad-
dress.
1 = Setting by BOOTP.
Bit 4: DNS Enable/Disable
Setting
FALSE = DNS disabled.
TRUE = DNS enabled.
Bits 5 to 31: Reserved (always
FALSE).
Read Struct ---
UINT 0002 hex
EPATH 20 F6 24 01 hex
Read/ Struct ---
Write
UDINT Set value
UDINT Set value
UDINT Set value
UDINT Set value
UDINT Set value
STRIN
Set value
G
Read/ STRIN
Set value
Write G
Value
*1
: Always
*2
*3