Omron NJ Series User Manual page 45

Service
Used by system, other
FTP client
control port
NTP client
SNMP agent
SNMP trap
TCP/UDP message service
(NX102)
*10. A CPU Unit with unit version 1.01 or later and Sysmac Studio version 1.02 or higher are required to use CPU routing.
NJ/NX-series CPU Unit Built-in EtherNet/IP Port User's Manual (W506)
Protocol Port number
TCP/UDP 9600
TCP 21
UDP 123
UDP 161
UDP 162
TCP/UDP 64000
1 Introduction
Remarks
You can change the port number in the
Unit Settings on the Sysmac Studio.
1
1-11