Kyocera TASKalfa 306ci Service Manual page 93

U243 Checking the DP motor
(Message: Check DP Motor)
Contents
Drive the motor or solenoid of the document processor.
Purpose
Check the operation of the motor or solenoid of the document processor.
Method
1.Press the [Start] key.
2.Select the item to operate.
Items
Feed Motor(CW)
Feed Motor(CCW)
Conv Motor(CW)
Conv Motor(CCW)
Rev Motor
3.Press the [Start] key. Each operation starts.
* :To stop the operation, press the [Stop] key.
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance item No. is displayed.
U244 DP switch check
(Message: Check DP SW)
Contents
Displays each switch and sensor status of the document processor.
Purpose
Execute to check the operation of switches and sensors of the document processor.
Method
1.Press the [Start] key.
2.Check the switches and sensors by manually turning them on/off.
* :The switch indication is inversed when the switch is detected.
Items
Feed
Regist
Set
Cover Open
Open
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance item No. is displayed.
Drive the DP feed motor (DPFM)
Reversely drives the DP feed motor (DPFM)
Rotate the DP conveying motor (DPCM)
Rotate the DP conveying motor (DPCM) reversely
Execute the automatic adjustment in the DP feedshift motor (DPFSM)
Check the DP feed sensor (DPFS).
Checks the DP registratio sensor (DPRS)
Checks the DP original sensor (DPOS)
Check the DP interlock switch (DPILSW)
Checks the DP open close switch (DPOCSW)
6-92
Contents
Contents
2R4/2R5/2R6