Kyocera TASKalfa 306ci Service Manual page 238

U063 Shading position adjustment
(Message: Adjust Shading Position)
Contents
Changes the scanner shading position.
Purpose
Execute if the vertical white lines appears on the image and they are not improved after cleaning
the shading plate, namely there are scratches or dirt inside the shading plate.
By changing the shading position, shading is available where there is no influence of dirt or
scratch of the shading plate.
Setting
1.Press the [Start] key.
2.By using the [+] [-] keys or the numeric keys, change the setting value.
Items
Position
* :If the set value is increased, the shading position moves toward the machine left side and
toward the right side if the value is reduced.
3.Press the [Start] key to set the setting value.
Precautions
Test copy of the original is available by pressing the [System Menu] key as interruption copy
mode when executing this maintenance mode.
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance item No. is displayed.
Contents
Changes the scanner shading position
Setting range
0 to 18
6-237
2R4/2R5/2R6
Initial Data
setting varia-
tion
0 0.091m
m