Kyocera TASKalfa 306ci Service Manual page 171

Setting: Tb2 Time Out
Sets the time to start ringing for an operator through the external telephone after receiving a call
in the FAX/telephone automatic switching mode. (See figure 1-3-27). Execute when a reception
error occurs when in the automatic FAX/telephone switching.
1.By using [ ] [ ] or the numeric keys, change the setting value.
Sets the Tb2 time-out time.
2.Press the [Start] key to set the setting value.
Setting: Tc Time Out
In the TAD mode, set the time to check if there are any triggers for shifting to FAX reception after
a connected handset receives a call. Unless switched to FAX reception during this period, oper-
ated as a normal phone after this.
In the TAD mode, change the setting when fax reception is unsuccessful or a telephone fails to
receive a call.
1.By using [ ] [ ] or the numeric keys, change the setting value.
Sets the Tc time-out time.
2.Press the [Start] key to set the setting value.
Setting: Td Time Out
Sets the length of time to determine silent status, one of the triggers for Tc time check.
In the TAD mode, change the setting when fax reception is unsuccessful or a telephone fails to
receive a call. Be sure not to set too short, otherwise the mode may be switched to fax while the
unit is being used as a telephone.
1.By using [ ] [ ] or the numeric keys, change the setting value.
Sets the Td time-out time.
2.Press the [Start] key to set the setting value.
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance item No. is displayed.
Contents
Contents
Contents
6-170
2R4/2R5/2R6
Setting Initial
range setting
1 to 255 80
Setting Initial
range setting
1 to 255 s 60
Setting Initial
range setting
1 to 255 30 (100 V model)
6 (220-240 V
model)
9 (120 V model)