Kyocera TASKalfa 306ci Service Manual page 302

U230 Optional device serial number
(Message: Optional Device Serial No)
Contents
Displays the optional device serial number
Purpose
Specify the production lot from the serial number to make it help of investigation at problem
occurrence.
Method
1.Press the [Start] key.
* :Displays the serial number.
Items
DP
Finisher
PF1
PF2
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance item No. is displayed.
U234 Setting destination for punch
(Message: Set Punch Destination)
Contents
Sets destination of the punch unit for the finisher.
Purpose
Execute when installing the punch unit for the destination different from the main unit.
Setting
1.Press the [Start] key.
2.Select [Destination].
Items
Auto
Japan Metric
Inch
Europe Metric
* :Initial setting: Japan Metric
3.Press the [Start] key to set the setting value.
4.Turn the power switch off then on. Wait more than 5 seconds between the power off and on.
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance item No. is displayed.
Displays the DP serial number.
Displays the finisher serial number.
Displays the PF1 serial number.
Displays the PF2 serial number.
Match the destination setting.
Japan metric
North American inch specification
European metric
6-301
Contents
Contents
2R4/2R5/2R6