Kyocera TASKalfa 306ci Service Manual page 360

U467 Color registration correction operation setting
(Message: Set Color Regist Adjustment Mode)
Contents
Sets the operation of the color registration correction and transfer belt speed correction.
Also, sets the execution condition of the color registration correction by the LSU temperature
variation.
Purpose
If the color registration is unstable due to the sensor failure, etc., set it to off to temporarily fix the
control value.
Method
1.Press the [Start] key.
2.Select the item to set.
* :The screen for setting is displayed.
Items
Color Regist
Timing
Setting: Color Regist
1.Select the item to set.
Items
On
Off
* :Initial setting: On
2.Press the [Start] key to set the setting value.
Setting: Timing
1.By using the [+] [-] keys or the numeric keys, change the setting value.
Items
LSU Temp
2.Press the [Start] key to set the setting value.
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance item No. is displayed.
Sets the color registration correction
Execute the color registration correction if the LSU temperature changes
by the specified value after the previous correction
Permitting the color registration correction operation
Prohibiting the color registration correction operation
Contents
Execution condition by the LSU temperature
variation
6-359
Contents
Contents
Setting
range
2 to 20
2R4/2R5/2R6
Initial setting
10