Kyocera TASKalfa 306ci Service Manual page 293

U199 Fuser temperature
(Message: Fuser Temperature)
Contents
Fuser temperature is displayed.
Purpose
Execute to check the fuser temperature.
Method
1.Press the [Start] key.
* :Fuser temperature is displayed.
Items
Heat Roller Edge
Heat Roller Center
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance item No. is displayed.
U200 All LEDs lighting
(Message: Turn ON All Panel LEDs)
Contents
All the LEDS on the operation panel are lit.
Purpose
Execute to check the operation panel LED lighting.
Method
1.Press the [Start] key.
2.Select [Execute].
3.Press the [Start] key.
* :All the LEDs on the operation panel are blinking.
4.Press the [Stop] key to turn the display off.
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance item No. is displayed.
Displays the heat roller edge temperature (°C)
Displays the heat roller center temperature (°C)
6-292
Contents
2R4/2R5/2R6