Kyocera TASKalfa 306ci Service Manual page 38

U053 Adjusting the motor speed
(Message: Adj Motor Speed)
Contents
Execute the motor speed fine tuning.
Purpose
No need to change the basic settings. Change the set value when an image failure occurs.
Method
1.Press the [Start] key.
2.Select the item to adjust.
* :The screen for adjusting is displayed.
Items
Full
Half
3/4
Setting
1.Select the item to adjust.
* :The screen for adjusting is displayed.
Items
Drum(K)
Drum(CMY)
Drum
Mono(K)
Dev(K)
Dev(CMY)
Fixing
Trans Belt
SB
SB Reverse
Brg1
PF2
PF3
2.Press the [ ] [ ] keys or the numeric keys to change the counter value.
3.Press the [Start] key to set the setting value.
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance item No. is displayed.
Full speed setting
Half speed setting
3/4 speed setting
Contents
Adjusting the drum motor(BK)
Adjusting the drum motor(M/C/Y)
Adjust the drum motor (K) at the time of
monochrome printing.
Adjusting the developer motor(BK)
Adjusting the developer motor(M/C/Y)
Adjusting the fuser motor(FUM)
Adjusting the transfer belt motor
Adjusts the DP feedshift motor (DPSPM)
rotation
Adjusts the DP feedshift motor (DPSPM)
reverse rotation
Adjusting the BR conveying motor
(BRCM)
Adjusting the PF paper feed motor
(PFPFM)
Adjusting the PF paper feed motor
(PFPFM)
Contents
Setting range
-5000 to 5000
-5000 to 5000
-5000 to 5000
-5000 to 5000
-5000 to 5000
-5000 to 5000
-5000 to 5000
-5000 to 5000
-5000 to 5000
-5000 to 5000
-5000 to 5000
-5000 to 5000
6-37
2R4/2R5/2R6
Initial Data
setting varia-
tion
0/0/0 -
0/0/0 -
0/0/0 -
0/0/0 -
0/0/0 -
0/0/0 -
0/0/0 -
0/0/0 -
0/0/0 -
0/0/0 -
0/0/0 -
0/0/0 -