Kyocera TASKalfa 306ci Service Manual page 163

U631 Communication control procedures 2
(Message: Comm Ctrl 2)
Contents
Sets the FAX communication.
Purpose
Sets the transmission and reception of ECM
Sets the CED frequency
Method
1.Press the [Start] key.
2.Select the item to set.
* :The screen for setting is displayed.
Items
ECM TX
ECM RX
CED Freq
Setting: ECM TX
Set to OFF when the reduction of transmission costs is of higher priority than image quality.
* :Do not set it to Off when connecting to the IP telephone line.
1.Select the item to set.
Items
On
Off
* :Initial setting: On
2.Press the [Start] key. Set the setting value.
Setting: ECM RX
Set to OFF when the reduction of transmission costs is of higher priority than image quality.
* :Do not set it to Off when connecting to the IP telephone line.
1.Select the item to set.
Items
On
Off
* :Initial setting: On
2.Press the [Start] key to set the setting value.
Sets ECM transmission.
Sets ECM reception.
The frequency of CED is set up.
ECM transmission is enabled.
ECM transmission is disabled.
ECM reception is enabled.
ECM reception is disabled.
6-162
Contents
Contents
Contents
2R4/2R5/2R6