Kyocera TASKalfa 306ci Service Manual page 264

Setting: Light/Normal123
1.Select the item to set.
* :The screen for setting is displayed.
Items
1st B/W
2nd B/W
2.Select the item to set.
3.By using the [+] [-] keys or the numeric keys, change the setting value.
1st
Items
W<160 Setting paper width less than 160
160<=W<210 Setting paper width of 160 or more and
less than 210
*1 *2
:35ppm model,
2nd
Items
W<160 Setting paper width less than 160
160<=W<210 Setting paper width of 160 or more and
less than 210
*1 *2
:35ppm model,
4.Press the [Start] key to set the setting value.
Setting: Heavy1
1.Select the item to set.
* :The screen for setting is displayed.
Items
1st 3/4
2ND 3/4
1st Half
2nd Half
1st 3/4 B/W
2nd 3/4 B/W
2.Select the item to set.
3.By using the [+] [-] keys or the numeric keys, change the setting value.
1st side transfer control value in monochrome mode
2nd side transfer control value in monochrome mode
Contents
: 40ppm model
Contents
: 40ppm model
1st side transfer control value at 3/4 speed
2nd side transfer control value at 3/4 speed
1st side transfer control value at half speed
2nd side transfer control value at half speed
1st side transfer control value at 3/4 speed in monochrome mode
2nd side transfer control value at 3/4 speed in monochrome mode
6-263
Contents
Setting range
setting
0 to 2000
550
55
0 to 2000
400
35
Setting range
setting
0 to 2000
650
65
0 to 2000
300
30
Contents
2R4/2R5/2R6
Initial Data
varia-
tion
-
*1
*2
-
*1
*2
Initial Data
varia-
tion
*1 -
*2
-
*1
*2