Kyocera TASKalfa 306ci Service Manual page 309

U244 DP switch check
(Message: Check DP Switches)
Contents
Displays each switch and sensor status of the document processor.
Purpose
Execute to check the operation of switches and sensors of the document processor.
Method
1.Press the [Start] key.
2.Check the switches and sensors by manually turning them on/off.
* :The switch indication is inversed when the switch is detected.
Items
Feed *2
Regist
Timing *1
*1
CIS Head
Set
Longitudinal
Cover Open
Open
Eject *1
*1: Simultaneous duplex scan model only, *2: Other than simultaneous duplex scan model
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance item No. is displayed.
U245 Checking the message
(Message: Check Display Message)
Contents
Displays messages indicated on the touch panel of the operation panel.
Purpose
Execute to check messages indicated.
Method
1.Press the [Start] key.
2.Using the [ ] [ ] key, display messages in order.
* :Enter the message number using the numeric keys to display the message of the desig-
nated number.
3.By using the [+] [-] keys key, switch the language.
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance item No. is displayed.
Check the DP feed sensor (DPFS).
Checks the DP registratio sensor (DPRS)
Check the DP timing sensor (DPTS).
Check the DPCIS sensor (DPCS).
Checks the DP original sensor (DPOS)
Check the DP original length switch (DPOLSW).
Check the DP interlock switch (DPILSW)
Checks the DP open close switch (DPOCSW)
Check the DP eject sensor (DPES).
6-308
Contents
2R4/2R5/2R6