Kyocera TASKalfa 306ci Service Manual page 112

U402 Adjusting the printing margins
(Message: Print Margin)
Contents
Adjusts the scan image margins.
Purpose
Make the adjustment if margins are incorrect
* :If the leading edge margin is less than the specified value, it may cause jam at the fuser.
* :If there is no bottom margin, when continuously printing, it may cause an image smudge on
the second page.
Adjustment
1.Press the [Start] key.
2.Press the [System Menu/Counter] key.
3.Press the [Start] key to output a test pattern.
4.Press the [System Menu/Counter] key.
5.Select the item to set.
Items
Lead
A Margin
C Margin
Trail
6.Press the [ ] [ ] keys or the numeric keys to change the counter value.
* :When the setting value is increased, the margin widens, and it narrows when the setting
value is decreased.
7.Press the [Start] key to set the setting value.
Precautions
Appropriate margins are not obtained after this adjustment, execute the following maintenance
mode.
U034 (P.6-228) > U402
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance item No. is displayed.
Contents
Adjusts the printer leading edge margin
Printer left margin
Printer right margin
Printer trailing edge margin
Left margin
(Within 4.0mm)
Figure 6-15
Setting range
0.0 to 10.0
0.0 to 10.0
0.0 to 10.0
0.0 to 10.0
Leading edge margin
(4.0 +1.5/-0mm)
A
Right margin
(Within 4.0mm)
Trailing edge margin
(Within 4.0mm)
6-111
2R4/2R5/2R6
Initial Data
setting varia-
tion
4.0 0.1 mm
3.0 0.1 mm
3.0 0.1 mm
3.9 0.1 mm