Kyocera TASKalfa 306ci Service Manual page 323

U260 Switching the timing for copy counting
(Message: Set Copy Count Mode)
Contents
Switches the count timing for the total counter and other counters between paper feed and eject.
Purpose
Change the count timing according to the user's request
Setting
1.Press the [Start] key.
2.Selects the copy count timing.
Items
Feed
Eject
* :Initial setting: Eject
3.Press the [Start] key to set the setting value.
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance item No. is displayed.
U265 Setting by destination
(Message: Set Model Destination)
Contents
Sets the OEM code.
Purpose
Execute when replacing the main PWB, etc.
Setting
1.Press the [Start] key.
2.By using the [+] [-] keys or the numeric keys, change the setting value.
Items
No.
3.Press the [Start] key to set the setting value.
4.Turn the power switch off then on. Wait more than 5 seconds between the power off and on.
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance item No. is displayed.
When secondary paper feed starts.
Selects the paper eject timing
Displays the OEM code
6-322
Contents
Contents
2R4/2R5/2R6