Kyocera TASKalfa 306ci Service Manual page 146

U486 Color/BW mode setting
(Message: Set ACS mode)
Contents
Sets the operation mode after detecting color originals with color/BW mixed originals.
Purpose
Mode: To prioritize the productivity when copying color/BW mixed originals in ACS mode, change
the setting to Mode3. However, if setting it to Mode3, even when monochrome originals come
after color originals, C/M/Y developer maintenance counts are counted up.
Permission: set in case of color background image when printing an envelope in BW half speed
mode processed as color printing.
Method
1.Press the [Start] key.
2.Select the item to set.
* :The screen for setting is displayed.
Items
Mode
Permission
Setting: Mode
1.Select the item to set.
Items
0: Mode1
1: Mode2
2: Mode3
3: Auto
* :Initial setting: 1 (Mode2)
2.Press the [Start] key to set the setting value.
Color/BW mode setting
Permit monochrome printing at half speed
For users mostly printing in monochrome mode and color/monochrome
mixed mode is not high during continuous printing.
Monochrome printing remains in the color process speed after switching
to color and other process is switched .
For users mostly printing in monochrome mode and color/monochrome
mixed mode is not high during continuous printing.
Even when receiving a monochrome print request during color printing,
color printing operation is continued until 9 pages and color mode is
switched to monochrome mode when starting printing of the 10th page
(Color process is stopped).
Appropriate for users who mostly print in color.
Once switched to the color mode, monochrome printing after that
remains in the color process including the surface speed.
Mode 1 to 3 is automatically selected depending on user's usage.
Select Mode 1 to 3 based on color print ratio and switch rate from the
print volume during the specified period.
6-145
Contents
Contents
2R4/2R5/2R6