Kyocera TASKalfa 306ci Service Manual page 299

U207 Operation key check
(Message: Check Panel Key Operation)
Contents
Check the operation panel keys.
Purpose
Check the operation of all the keys and LEDs on the operation panel.
Method
1.Press the [Start] key to display execution window.
2.[Count 0] appears and the LED at the most left column in the operation panel is turned on.
3.Pressing the keys in order from the top at the row where the LED is lit, count increases one by
one. When pressing all the keys at the row and there is an LED at the next right side row, the
LED is lit.
* :The job separator LED is lit during execution and turns off when completing.
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance item No. is displayed.
U211 Enhancement unit connection setting
(Message: Set Enhancement Connection)
Contents
Execute the inner job separator installation setting.
Purpose
Execute when installing the inner job separator.
* :Make sure to set to [Off] to prevent wrong LED lighting when not installed.
Method
1.Press the [Start] key.
2.Select [Inner Job Separator].
* :The screen for setting is displayed.
Items
Inner Job Separator
Method
1.Select the item to set.
Items
On
Off
* :Initial setting: Off
2.Press the [Start] key to set the setting value.
3.Turn the power switch off then on. Wait more than 5 seconds between the power off and on.
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance item No. is displayed.
Inner job separator setting
Installing the inner job separator
The inner job separator is not installed
6-298
Contents
Contents
2R4/2R5/2R6