Kyocera TASKalfa 306ci Service Manual page 80

U161 Fuser temperature adjustment
(Message: Adj Fuser Temp)
Contents
Sets the fuser temperature.
Purpose
Normally no need to change. However, change the setting as corrective measures for paper curl,
creases and fusing failure on thick paper.
Method
1.Press the [Start] key.
2.Select the item to set.
* :The screen for setting is displayed.
Items
Center
Edge
Setting: Center
1.Select the item to set.
2.Press the [ ] [ ] keys or the numeric keys to change the counter value.
Items
Pressure Start
Drive Start
Ready
Steady
Printing
Waiting
3.Press the [Start] key to set the setting value.
Setting: Edge
1.Select the item to set.
2.Press the [ ] [ ] keys or the numeric keys to change the counter value.
Items
Ready
Steady
Waiting
3.Press the [Start] key to set the setting value.
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance item No. is displayed.
Set the center thermistor temperature.
Sets the edge thermistor control temperature.
Contents
Sets the temperature to start press-
ing
Sets the drive start temperature
Sets the Ready temperature
Sets the secondary stability tem-
perature
Set the temperature during printing 100 to 200
Set the standby temperature
Contents
Sets the Ready temperature
Sets the secondary stability tem-
perature
Set the standby temperature
6-79
Contents
Setting range
setting
0 to 200 30
0 to 200 100
100 to 200 145
100 to 200 155
155
100 to 200 155
Setting range
setting
100 to 200 105
100 to 200 -
100 to 200 -
2R4/2R5/2R6
Initial Data
varia-
tion
1°C
1°C
1°C
1°C
1°C
1°C
Initial Data
varia-
tion
1°C
1°C
1°C