Kyocera TASKalfa 306ci Service Manual page 316
Hide thumbs
Also See for TASKalfa 306ci:
- Operation manual (447 pages) ,
- First steps quick manual (36 pages) ,
- Quick manual (36 pages)
Advertisement
Setting: 3/4Punch(L)3
1.Select [3/4Punch(L)3].
2.By using the [+] [-] keys or the numeric keys, change the setting value.
Content to adjust
3-hole and 4-hole long-edge punch position
adjustment (3rd hole)
* :Increase the specified value if the punch position is shorter than specified.
Reduce the specified value if the punch position is longer than specified.
3.Press the [Start] key to set the setting value.
Setting: 4Punch(L)4
1.Select [4Punch(L)4].
2.By using the [+] [-] keys or the numeric keys, change the setting value.
Content to adjust
4-hole long-edge punch position adjustment
(4th hole)
* :Increase the specified value if the punch position is shorter than specified.
Reduce the specified value if the punch position is longer than specified.
3.Press the [Start] key to set the setting value.
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance item No. is displayed.
Setting
range
-10 to 10
Preset value: 160±0.5mm (metric) 4holes
215.9±0.5mm (inch) 3 holes
Setting
range
-10 to 10
Preset value: 240±0.5mm (metric) 4 holes
6-315
2R4/2R5/2R6
Initial setting
Data varia-
tion
0
0.26mm
Initial setting
Data varia-
tion
0
0.26mm
Advertisement
