Kyocera TASKalfa 306ci Service Manual page 152

U601 Initialize: Keep data
(Message: Init Keep Data)
Contents
Initializes software switches other than the machine data on the FAX PWB according to the des-
tination and OEM setting.
Purpose
Initialize the FAX PWB without changing the user registration data and the factory defaults
Method
1.Press the [Start] key.
* :The screen for entering the destination code and OEM code is displayed.
2.Select [Country Code].
3.Press the [ ] [ ] keys or the numeric keys to change the counter value.
* :Refer to the destination code list. (P.6-376Refer to page 1-6-58)
Items
Country Code
OEM Code
Execute
* :No need to change the default value of [OEM Code].
4.Select [Execute].
5.Press the [Start] key to execute the initialization.
* :Press the [Stop] key to cancel the data initialization.
6.The firmware version is displayed after the data initialization.
The firmware version of 3 types of application, boot and IPL is displayed.
* :Where an irregular value is input, when it initializes, the following errors are displayed.
Unknown Country (When Country Code is unknown)
Unknown OEM (When OEM Code is unknown)
Unknown Country (When both are unknown)
Setting Destination code
Sets the OEM code
Executing data initialization
Kind of error
6-151
Contents
2R4/2R5/2R6