Kyocera TASKalfa 306ci Service Manual page 358

Setting: Mode
1.Select the item to set.
Items
Short
Normal
Long
Auto
* :Initial setting: Normal
2.Press the [Start] key to set the setting value.
Setting: Leaving Time
3.By using the [+] [-] keys or the numeric keys, change the setting value.
Items
Time(min) Setting the sleep timer
4.Press the [Start] key to set the setting value.
Setting: Target Value
1.Select the item to set.
2.By using the [+] [-] keys or the numeric keys, change the setting value.
Items
Thickness(C) Toner layer calibration (Cyan)
Thickness(M) Toner layer calibration (Magenta)
Thickness(Y) Toner layer calibration (Yellow)
Thickness(K) Toner layer calibration (Black)
Gamma(C) Light amount calibration (Cyan)
Gamma(M) Light amount calibration (Magenta)
Gamma(Y) Light amount calibration (Yellow)
Gamma(K) Light amount calibration (Black)
*1: 40 ppm model
3.Press the [Start] key to set the setting value.
Method: Calib
1.Select the item to execute.
2.Press the [Start] key.
* :Calibration is started.
Same operation as [System Menu] - [Adjustment/Maintenance] - [Calibration].
Items
Regist
Full
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance item No. is displayed.
Color print mode setting: Short
Color print mode setting: Normal
Color print mode setting: Long
Color print mode setting: Auto
Contents
Contents
Execute the registration correction calibration
Executes Full Calibration
6-357
Contents
Setting
range
0 to 1440
Setting
range
0 to 1000
0 to 1000
0 to 1000
0 to 1000
0 to 1000
0 to 1000
0 to 1000
0 to 1000
Contents
2R4/2R5/2R6
Initial setting
1080 (min)
Initial setting
*1
680/930
*1
610/900
*1
540/870
*1
700/170
*1
445/430
*1
445/430
*1
375/360
*1
465/430