Kyocera TASKalfa 306ci Service Manual page 246

Adjustment: Front Head/Back Head/CIS
1.By using the [+] [-] keys or the numeric keys, change the setting value.
For the copy example 1, increase the value.
For the copy example 2, decrease the value.
* :When the setting value is increased, the image moves forward, and it moves backward
when the setting value is decreased.
2.Press the [Start] key to set the setting value.
Precautions
Check the 2nd side after adjusting the 1st side. Adjust if necessary.
Check the copy image after the adjustment. If the image is still incorrect, adjust the following in
the maintenance mode.
U034(P.6-228) > U071
Adjustment: Front Tail/Back Tail/CIS Tail
1.By using the [+] [-] keys or the numeric keys, change the setting value.
For the copy example 1, increase the value.
For the copy example 2, decrease the value.
* :When the setting value is increased, the image get longer, and it shortens when the setting
value is decreased.
2.Press the [Start] key to set the setting value.
Completion
Press the [Stop] key.
* :The screen for selecting a maintenance item No. is displayed.
Original Copy
example 1
Figure 6-36
Original
Copy
example 1
Figure 6-37
6-245
Copy
example 2
Copy
example 2
2R4/2R5/2R6