Kyocera TASKalfa 306ci Service Manual page 306

U241 Finisher switch check
(Message: Check Finisher Switches)
Contents
Displays the status of finisher's switches and sensors operation.
Purpose
Execute for the finisher's switches and sensors operation check.
Method
1.Press the [Start] key.
2.Select the item to operate.
* :The screen for setting is displayed.
Items
Finisher
Mail Box
Punch
Method: Finisher
1.Check the switches and sensors by manually turning them on/off.
* :The switch indication is inversed when the switch is detected.
Items
Front Cover *1
Eject Cover *2
Top Cover *3
Tray U-Limit *1
Tray HP2 *2
Tray Middle *1
Tray L-Limit
Tray Top *1
HP
Sub Tray Eject *2
Middle Tray Eject
Staple HP
Middle Tray
Width Front HP
Width Tail HP
Bundle Eject HP
Match Paddle
Lead Paddle
Press Paper Up *4
Press Paper Down *4
Set *4
*1: 1000/3000 DF only, *2: 3000 DF only*3: 1000 DF only*4: Inner DF only
Finisher switch sensor operation check
Mail Box switch sensor operation check
Punch unit switch sensor operation check
DF front cover switch (DFFCSW)
DF exit cover switch (DFECSW)
DF top cover switch (DFTCSW)
DF tay sesor 1: DFTS1
DF tay sesor 2: DFTS2
DF tay sesor 3: DFTS3
DF tay sesor 4: DFTS4
DF tray upper side sensor (DFTUSS)
DF paper entry sensor (DFPES)
DF sub tray exit sensor (DFSES)
DF middle exit sensor (DFMES)
DF slide sensor (DFSLS)
DF main tray exit sensor (DFMTS)
DF side registration sensor 1 (DFSRS1)
DF side registration sensor 2 (DFSRS2)
DF bundle exit sensor (DFBDS)
DF adjustment sensor (DFADS)
DF paddle sensor (DFPDS)
DF press paper sensor 1
DF press paper sensor 2
DF installation detection switch
6-305
Contents
Contents
2R4/2R5/2R6