Hints And Tips / Problem Solving; Hints And Tips - Xerox Document Centre 220 Getting Started

4. Hints and Tips / Problem Solving

Hints and Tips

1. Prior to performing the initial scan job, verify the following from
2. You can confirm that a scan job was successfully completed by
3. The default directory created for each scan job is
Companion to Getting Started with Scanning Services
a workstation on the network by logging into the scan account
and copying a file into the scan repository:
l
The DC220/230/332/340ST user account and password are
correct.
l
The correct rights to the document repository have been
assigned to the DC220/230/332/340ST.
Also, make sure that the Confirmation Sheet option is enabled.
This provides details of each scan job, including status, filing
location, Filing Policy and scan settings. Enabling the
Confirmation Sheet is part of the set up procedure detailed in the
Set Up Scanning - NetWare and Set Up Scanning - FTP (File
Transfer Protocol) chapters of this guide.
verifying that the number of pages scanned is the same as the
number of files stored in the document repository for that job.
(Unless the Enable Multi-Page TIFF option is selected, which
will create a single TIFF file for a multi-page document, instead
of one TIFF file for each page.)
NETSCAN.XSM.
Page 4 - 1