Double Wrench Method
To prevent undesired hose or connector rotation, two
wrenches must be used; one torque wrench and one backup
wrench. If two wrenches are not used, inadvertent component
rotation may occur which absorbs torque and causes
3121776
SECTION 5 - BASIC HYDRAULICS INFORMATION & SCHEMATICS
improper joint load and leads to leaks. For hose connections,
the 'layline' printed on the hose is a good indicator of proper
hose installation. A twisted lay-line usually indicates the hose
is twisted. See Figure 5-12. for double wrench method require-
ments.
Figure 5-12. Double Wrench Method
5-51