Replace Fixed End Brackets - JLG 600SC Service And Maintenance Manual

3. Install new 8-32 x 0.500 self threading screw on other
side. Torque to 18-20 in-lb (2-2.25 Nm).
NOTE: When tightening screws make sure screw head is seated
against link with no space in between link and underside of
screw head.
3121776
SECTION 4 - BOOM & PLATFORM

Replace Fixed End Brackets

REPOSITION CABLES/HOSES. KEEP COVERED DURING GRINDING TO PREVENT
DAMAGE.
1. Remove rivets as shown in link removal instructions.
4-31