Replace Fixed End Brackets - JLG H340AJ Service And Maintenance Manual

SECTION 4 - BOOM & PLATFORM
3. Install new 8-32 x 0.500 self threading screw on other
side. Torque to 18-20 in. lbs. (2-2.25 Nm).
NOTE: When tightening screws make sure screw head is seated
against link with no space in between link and underside of
screw head.
4-24

Replace Fixed End Brackets

REPOSITION CABLES/HOSES AND KEEP COVERED DURING GRINDING TO PRE-
VENT DAMAGE.
1. Remove rivets as shown in link removal instructions on
page 19.
3121634