Connecting External Devices - R&S TSMA6 User Manual

Autonomous mobile network scanner
Hide thumbs Also See for TSMA6:
Table of Contents

Advertisement

®
R&S
TSMA6
Risk of instrument damage due to inappropriate operating conditions
Specific operating conditions are required to ensure accurate measurements and to
avoid damage to the instrument. Observe the information on appropriate operating
conditions provided in the basic safety instructions and the instrument's data sheet.
Check the equipment for completeness using the delivery note and the accessory lists
for the various items. Check the instrument for any damage. If there is damage, imme-
diately contact the carrier who delivered the instrument. Make sure not to discard the
box and packing material.
Packing material
Retain the original packing material. If the instrument needs to be transported or ship-
ped later, you can use the material to protect the control elements and connectors.
Accessory list
The following items are included with shipment of the R&S TSMA6:
12 V DC power supply cable with a cigarette lighter connector
Wide range RF paddle antenna (700 MHz to 2600 MHz)
Active GPS patch antenna
LAN cable with ferrit
Ferrit for LAN cable supplied by the customer

5.2 Connecting External Devices

The following external devices must be connected before connecting the power supply.
To select the correct connectors, refer to
1. Connect the RF antenna to the RF IN connector (see
2. Connect the GPS antenna to the GPS ANT port (see
3. Connect mouse and keyboard to the USB 2.0 ports (see
monitor to the appropriate monitor port (HDMI, USB-C)) (see
you want to use local operation. (optional)
4. Connect a LAN cable to the LAN port if you want to use the R&S TSMA6 via
Remote Desktop or as distributed system (optional). (See
5. OPTIONAL: Connect external devices/storage devices and test mobile phones to
USB 2.0 / USB 3.0 / USB-C ports (see
User Manual 4900.8057.02 ─ 01
Connecting External Devices
Chapter 3.2, "Rear Panel
Figure 3-2
Figure 3-2
Figure 3-2
Figure 3-2
Figure 3-2
- 9, 10, 11).
Preparing for Use
View",
on page 10.
- 14).
- 4).
- 11) and a
Figure 3-2
- 13, 9) if
- 12.)
18

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents