8.11
Error Clear Function
Common
This function clears errors that occur using the system monitor.
By clicking the
cleared and the ERR. LED is also turned off. The operation is the same as Error clear request (YF) as well as
executing error clear from the display unit.
However, error history cannot be cleared.
For instructions on Error clear request (YF) and executing error clear from the display unit, refer to the following.
• Error clear request (YF) (
• Checking and Clearing Errors (
[Diagnostics]
button in the system monitor, the latest error code stored in Latest error code (Un\G19) is
Page 183, Appendix 1)
Page 151, Section 9.4)
[System Monitor...]
error module
CHAPTER 8 FUNCTIONS
139
8