Mitsubishi Electric MELSEC L Series User Manual page 102

Item
The graph is drawn with an adjustment so that the start point and end point are on the edge points of the exponential function of y = e
(X = 0 to 10).
Exponential function
The graph is drawn with an adjustment so that the start point and end point are on the edge points of the logarithmic function of y =
log X (X = 1 to 101).
e
Logarithmic function
The interval between the start point and end point is drawn in a sine function wave. The amplitude A of the sine function to be drawn is
the value set in "Amplitude". The start position can be changed by 180 by setting "Phase".
*1
Sine function
Number of data in a wave pattern: Wx
Digital value range: Wy
Data position of the start point: Xst
Data position of the end point: Xed
The interval between the start point and end point is drawn in a cosine function wave. The amplitude A of the cosine function to be
drawn is the value set in "Amplitude". The start position can be changed by 180 by setting "Phase".
*1
Cosine function
Number of data in a wave pattern: Wx
Digital value range: Wy
Data position of the start point: Xst
Data position of the end point: Xed
*1 When using the sine function and cosine function, set the same digital value for the start point and end point.
100
Setting result
Start point
Start point
Wx
Xed-Xst
Wx
Xed-Xst
End point
x
End point