When Using The Module In A Standard System Configuration - Mitsubishi Electric MELSEC L Series User Manual

10.2
When Using the Module in a Standard System
Configuration
This section shows a program example where the following system configuration and conditions apply.
(1) System configuration
The following shows a system configuration example.
CPU module (L26CPU-BT)
Power supply module
(L61P)
(2) Programming condition
Set CH1 and CH2 of the D/A converter module to D/A conversion enable, and then write the digital values.
If a digital value write error occurs, an error code is displayed in BCD.
Configure the scaling setting in CH1 only, and configure the warning output function in CH2 only.
154
X/Y00 X/Y10 X/Y30 X/Y40 X/Y50
to to to to to
X/Y0F X/Y2F X/Y3F X/Y4F X/Y8F
D/A converter module (L60DA4)
Input module (LX40C6)
Output module (LY42NT1P)
END cover (L6EC)