List Of Setting Value Change Screens - Mitsubishi Electric MELSEC L Series User Manual

9.3

List of Setting Value Change Screens

The following is a list of setting value change screens.
(1) Displayed in English:
Setting item
D/A conversion enable/disable setting
Warning output setting
Warning output upper limit value
Warning output lower limit value
Scaling enable/disable setting
Scaling upper limit value
Scaling lower limit value
(2) D/A conversion enable/disable setting
Select "DISABLE" or "ENABLE" in the "D/A CONVERSION" screen.
"D/A CONVERSION" screen
(3) Warning output setting
Select "DISABLE" or "ENABLE" on the "WARNING OUTPUT" screen.
"WARNING OUTPUT" screen
"WARN UP LIMIT" screen
"WARN LOW LIMIT" screen
Table of input items
Input item
WARN UP LIMIT
WARN LOW LIMIT
Name
Screen display
D/A CONVERSION
WARNING OUTPUT
WARN UP LIMIT
WARN LOW LIMIT
SCALING
SCALE UP LIMIT
SCALE LOW LIMIT


Screen format
Selection
Selection
Numeric value
Numeric value
Selection
Numeric value
Numeric value
1.
Use the and buttons to select "DISABLE" or
"ENABLE", and then press the
1.
Use the and buttons to select "DISABLE" or
"ENABLE", and then press the
selected "ENABLE", follow the rest of the
procedure.)
2.
Move the cursor using the
then increment or decrement the value at the cursor
by 1, using the and
button.
3.
Move the cursor using the
then increment or decrement the value at the cursor
by 1, using the and
button.
Input range
Input upper limit
32767
CHAPTER 9 DISPLAY UNIT
Input regulation
Upper limit value Lower limit value
 
 
32767 -32768
32767 -32768
 
32000 -32000
32000 -32000
button.
OK
button. (If you
OK
and buttons, and
buttons. Press the
OK
and buttons, and
buttons. Press the
OK
Input lower limit
-32768
149
9