Mitsubishi Electric MELSEC L Series User Manual page 167

5.
Display the initial setting window for the D/A converter module (L60DA4) and configure the setting
as follows.
Project window
6.
Display the Auto Refresh setting window for the D/A converter module (L60DA4) and configure the
setting as follows.
Project window
[Auto_Refresh]
7.
Write the set parameter to the head module and reset the head module, or turn off and on the
programmable controller power supply.
[Online] [Write to PLC...]
[Intelligent Function Module]
[Intelligent Function Module]
or Power OFF
CHAPTER 10 PROGRAMMING
[L60DA4] [Parameter]
[L60DA4]
ON
10
165