Mitsubishi Electric MELSEC L Series User Manual page 152

Set the values so that WARN UP LIMIT is greater than WARN LOW LIMIT.
Even though the value satisfying the condition where "WARN UP LIMIT" is equal to or smaller than "WARN LOW LIMIT" can
be input on the display unit, an error occurs on the D/A converter module.
(4) Scaling setting
Select "DISABLE" or "ENABLE" in the "SCALING" screen.
"SCALING" screen
"SCALE UP LIMIT" screen
"SCALE LOW LIMIT" screen
Table of input items
SCALE UP LIMIT
SCALE LOW LIMIT
Set the values so that SCALE UP LIMIT is greater than SCALE LOW LIMIT.
Even though the value satisfying the condition where "SCALE UP LIMIT" is equal to or smaller than "SCALE LOW LIMIT"
can be input on the display unit, an error occurs on the D/A converter module.
150


Input item
1.
Use the and
"ENABLE", and then press the
selected "ENABLE", follow the rest of the
procedure.)
2.
Move the cursor using the
then increment or decrement the value at the cursor
by 1, using the
button.
3.
Move the cursor using the
then increment or decrement the value at the cursor
by 1, using the
button.
Input range
Input upper limit
32000
buttons to select "DISABLE" or
button. (If you
OK
and buttons, and
and buttons. Press the
and buttons, and
and buttons. Press the
Input lower limit
-32000
OK
OK