Mitsubishi Electric MELSEC L Series User Manual page 59

Item
Output mode setting
*1 The operation of the D/A converter module in the normal output mode differs from the operation in the wave output
mode. For details, refer to the following.
• Analog Output HOLD/CLEAR Function (
(a) Intelligent function module switch setting (Switch 1 to 5)
The items described in (1) also can be set in Switch 1 to 5 of the intelligent function module switch setting of
"PLC parameter". The following are the switches to set each item.
• Switch 1, Switch 2: Output range setting
• Switch 3: HOLD/CLEAR function setting
• Switch 4: Drive mode setting, output mode setting
For the setting procedure, refer to the following.
• Intelligent function module switch setting (
Though the example of procedure is for GX Developer, same settings and values can be used for GX Works2
as well.
Description
Set the output mode of the D/A converter
module.
CHAPTER 7 VARIOUS SETTINGS
Setting value
• Normal output mode (conversion speed:
20s/CH) (default value)
• Wave output mode (conversion speed:
L60DA4
50s/CH)
• Wave output mode (conversion speed:
80s/CH)
• Normal Output Mode (default value)
L60DAVL8
• Wave Output Mode
• Normal Output Mode (default value)
L60DAIL8
• Wave Output Mode
Page 71, Section 8.4)
Page 238, Appendix 9.1 (2))
7
57