Mitsubishi Electric MELSEC L Series User Manual page 215

(36)CH Analog output command value unit (Un\G1711, Un\G1713, Un\G1715,
Un\G1717, Un\G1719, Un\G1721, Un\G1723, Un\G1725)
The unit of CH Analog output command value (Un\G1710, Un\G1712, Un\G1714, Un\G1716, Un\G1718,
Un\G1720, Un\G1722, Un\G1724) is stored.
Use these areas for troubleshooting. For details, refer to the following.
• When an analog output value is not output (
-2
10
mA
-2
10
V
(37)RUN LED status monitor (Un\G1730)
The current RUN LED status is stored.
For details, refer to the following.
• PART NAMES (
LED status
Off
On
Flashing (every 0.5s)
(38)ERR LED status monitor (Un\G1731)
The current ERR. LED status is stored.
For details, refer to the following.
• PART NAMES (
LED status
Off
On
Flashing (every 0.5s)
(39)ALM LED status monitor (Un\G1732)
The current ALM LED status is stored.
For details, refer to the following.
• PART NAMES (
LED status
Off
On
Page 177, Section 11.6.2 (2))
Unit
DAVL8 DAIL8
Page 21, CHAPTER 2)
Stored value
0
1
2
DAVL8 DAIL8
Page 21, CHAPTER 2)
Stored value
0
1
2
DAVL8 DAIL8
Page 21, CHAPTER 2)
Stored value
0
1
DAVL8 DAIL8
Stored value
0
1
Description
Indicates that the LED is off.
Indicates that the LED is on.
Indicates that the LED flashes.
Description
Indicates that the LED is off.
Indicates that the LED is on.
Indicates that the LED flashes.
Description
Indicates that the LED is off.
Indicates that the LED is on.
APPX
A
213