On-Board System Readiness Tests Access Procedure; Pid/Data Monitor And Record Procedure - Mazda 3 Workshop Manual

Mazda 3 Workshop Manual – Engine + Wiring Diagrams + Diagnostic Trouble Codes
3. Record the freeze frame PID data using the WDS or equivalent.

On-Board System Readiness Tests Access Procedure

1. Perform the necessary vehicle preparation and visual inspection.
2. Connect the WDS or equivalent to the vehicle DLC-2 16-pin connector located in the driver
compartment.
3. Monitor the OBD systems operating status using the WDS or equivalent.

PID/DATA Monitor and Record Procedure

1. Perform the necessary vehicle preparation and visual inspection.
2. Connect the WDS or equivalent to the vehicle DLC-2 16-pin connector located in the driver
compartment.
3. Access and monitor PIDs using the WDS or equivalent.
Downloaded from https://carmanualshub.com/ - automotive repair manuals website